Home » Blog » Categories »

Looking for Employers for the Meeting C++ Job Fair and the C++ Jobs Newsletter

By Meeting C++ | Apr 15, 2025 07:46 AM | Tags: meetingcpp hiring community

Meeting C++ is looking for C++ Employers, as it starts a C++ Jobs Newsletter and hosts an online C++ Job fair in May!

Looking for Employers for the C++ Job Fair and the C++ Jobs Newsletter

by Jens Weller

From the article:

Meeting C++ launches a new jobs newsletter! Share your open positions!

The jobs newsletter already has 1500+ subscribers and aims at a bi-weekly schedule, with sometimes being weekly when lots of jobs are submitted. Once a month Meeting C++ will also send the jobs newsletter on its main newsletter with 25k+ subscribers in 2025. So your open positions will be seen by lots of experienced developers.

 

Creating a Generic Insertion Iterator, Part 1 -- Raymond Chen

By Blog Staff | Apr 11, 2025 01:04 PM | Tags: None

RaymondChen_5in-150x150.jpgIn our previous post, we created an inserter iterator for unhinted insertion, and now we’re taking it a step further by generalizing it into a boilerplate-only version. This generic output iterator allows for custom insertion logic using a lambda, but as we’ll see, it doesn’t fully satisfy iterator requirements—something we’ll attempt to fix next time.

Creating a Generic Insertion Iterator, Part 1

by Raymond Chen

From the article:

Last time, we created an inserter iterator that does unhinted insertion. We noticed that most of the iterator is just boilerplate, so let’s generalize it into a version that is all-boilerplate.

// Do not use: See discussion
template<typename Lambda>
struct generic_output_iterator
{
    using iterator_category = std::output_iterator_tag;
    using value_type = void;
    using pointer = void;
    using reference = void;
    using difference_type = void;

    generic_output_iterator(Lambda&& lambda) :
        insert(std::forward<Lambda>(lambda)) {}

    generic_output_iterator& operator*() noexcept
        { return *this; }
    generic_output_iterator& operator++() noexcept
        { return *this; }
    generic_output_iterator& operator++(int) noexcept
        { return *this; }

    template<typename Value>
    generic_output_iterator& operator=(
        Value&& value)
    {
        insert(std::forward<Value>(value));
        return *this;
    }

protected:
    std::decay_t<Lambda> insert;

};

template<typename Lambda>
generic_output_iterator<Lambda>
generic_output_inserter(Lambda&& lambda) {
    return generic_output_iterator<Lambda>(
        std::forward<Lambda>(lambda));
}

template<typename Lambda>
generic_output_iterator(Lambda&&) ->
    generic_output_iterator<Lambda>;

For convenience, I provided both a deduction guide and a maker function, so you can use whichever version appeals to you. (The C++ standard library has a lot of maker functions because they predate class template argument deduction (CTAD) and deduction guides.)

Using Senders/Receivers -- Lucian Radu Teodorescu

By Blog Staff | Apr 9, 2025 01:01 PM | Tags: None

1.pngC++26 will introduce senders/receivers. Lucian Radu Teodorescu demonstrates how to use them to write multithreaded code.

Using Senders/Receivers

by Lucian Radu Teodorescu

From the article:

This is a follow-up to the article in the previous issue of Overload, which introduced the upcoming C++26 senders/receivers framework [WG21Exec]. While the previous article focused on presenting the main concepts and outlining what will be standardized, this article demonstrates how to use the framework to build concurrent applications.

The goal is to showcase examples that are closer to real-world software rather than minimal examples. We address three problems that can benefit from multi-threaded execution: computing the Mandelbrot fractal, performing a concurrent sort, and applying a graphical transformation to a set of images.

All the code examples are available on GitHub [ExamplesCode]. We use stdexec [stdexec], the reference implementation for the senders/receivers proposal. Additionally, some features included in the examples are not yet accepted by the standard committee, though we hope they will be soon.

How do I create an inserter iterator for unhinted insertion into std::map? -- Raymond Chen

By Blog Staff | Apr 7, 2025 12:57 PM | Tags: None

RaymondChen_5in-150x150.jpgThe C++ standard library provides various inserters like back_inserter, front_inserter, and inserter, but for associative containers like std::map, only inserter is available, requiring a hint. However, if elements arrive in an unpredictable order, providing a hint could be inefficient, so a custom inserter that performs unhinted insertion can be a useful alternative.

How do I create an inserter iterator that does unhinted insertion into an associative container like std::map? 

by Raymond Chen

From the article:

The C++ standard library contains various types of inserters:

  • back_inserter(c) which uses c.push_back(v).
  • front_inserter(c) which uses c.push_front(v).
  • inserter(c, it) which uses c.insert(it, v).

C++ standard library associative containers do not have push_back or push_front methods; your only option is to use the inserter. But we also learned that the hinted insertion can speed up the operation if the hint is correct, or slow it down if the hint is wrong. (Or it might not have any effect at all.)

What if you know that the items are arriving in an unpredictable order? You don’t want to provide a hint, because that’s a pessimization. The inserter requires you to pass a hint. What do you do if you don’t want to provide a hint?

C++26: Erroneous Behaviour -- Sandor Dargo

By Blog Staff | Apr 5, 2025 12:54 PM | Tags: None

SANDOR_DARGO_ROUND.JPGWith C++26, the introduction of erroneous behavior provides a well-defined alternative to undefined behavior when reading uninitialized values, making it easier to diagnose and fix potential bugs. This blog post explores the impact of P2795R5, how compilers will handle erroneous values, and the new [[indeterminate]] attribute for cases where deliberate uninitialized values are needed.

C++26: Erroneous Behaviour

by Sandor Dargo

From the article:

If you pick a random talk at a C++ conference these days, there is a fair chance that the speaker will mention safety at least a couple of times. It’s probably fine like that. The committee and the community must think about improving both the safety situation and the reputation of C++.

If you follow what’s going on in this space, you are probably aware that people have different perspectives on safety. I think almost everybody finds it important, but they would solve the problem in their own way.

A big source of issues is certain manifestations of undefined behaviour. It affects both the safety and the stability of software. I remember that a few years ago when I was working on some services which had to support a 10x growth, one of the important points was to eliminate undefined behaviour as much as possible. One main point for us was to remove uninitialized variables which often lead to crashing services.

Thanks to P2795R5 by Thomas Köppe, uninitialized reads won’t be undefined behaviour anymore - starting from C++26. Instead, they will get a new behaviour called “erroneous behaviour”.

The great advantage of erroneous behaviour is that it will work just by recompiling existing code. It will diagnose where you forgot to initialize variables. You don’t have to systematically go through your code and let’s say declare everything as auto to make sure that every variable has an initialized value. Which you probably wouldn’t do anyway.

But what is this new behaviour that on C++ Reference is even listed on the page of undefined behaviour? It’s well-defined, yet incorrect behaviour that compilers are recommended to diagnose. Is recommended enough?! Well, with the growing focus on safety, you can rest assured that an implementation that wouldn’t diagnose erroneous behaviour would be soon out of the game.

Contracts for C++ Explained in 5 Minutes -- Timur Doumler

By Blog Staff | Apr 3, 2025 12:50 PM | Tags: None

CRussia2019_portrait-1-1024x683.jpgContract assertions, introduced in proposal P2900 for C++26, provide a robust mechanism for runtime correctness checks, offering more flexibility and power than the traditional assert macro. This blog post will explore how contract assertions work, their various evaluation semantics, and how they can improve code reliability with preconditions, postconditions, and custom violation handlers.

Contracts for C++ Explained in 5 Minutes

by Timur Doumler

From the article:

With P2900, we propose to add contract assertions to the C++ language. This proposal is in the final stages of wording review before being included in the draft Standard for C++26.

It has been suggested by some members of the C++ standard committee that this feature is too large, too complicated, and hard to teach. As it turns out, the opposite is true: contract assertions are actually very simple and can be explained in just five minutes. In this blog post, we will do exactly this!

As the name says, contract assertions are assertions — correctness checks that the programmer can add to their code to detect bugs at runtime. So they’re just like the existing assert macro, except they’re not macros (which fixes a bunch of problems) and they’re way more flexible and powerful!


contract_assert replaces assert

Our replacement for assert is called contract_assert. Unlike assert, contract_assert is a proper keyword, but it works in the same way:
 
auto w = getWidget(); 
contract_assert(w.isValid());  // a contract assertion
processWidget(w);
 
The default behaviour is also the same: the assertion is checked, and if the check fails, the program prints a diagnostic message and terminates.

A Pattern for Obtaining a Single Value While Holding a Lock -- Raymond Chen

By Blog Staff | Apr 1, 2025 12:46 PM | Tags: None

RaymondChen_5in-150x150.jpgWhen working with a mutex-protected variable, you often need to read or modify its value while holding the lock, but then operate on the value outside the lock to minimize contention. While the traditional approach involves copying the value within a locked scope, using an immediately-invoked lambda or helper function can streamline this process, enabling efficient copy elision or move semantics to optimize performance.

A Pattern for Obtaining a Single Value While Holding a Lock

by Raymond Chen

From the article:

It is often the case that you have a mutex or other lockable object which protects access to a complex variable, and you want to read the variable’s value (possibly modifying it in the process) while holding the lock, but then operate on the value outside the lock.

The traditional way is to do something like this:

// Assume we have these member variables
std::mutex m_mutex;
Widget m_widget;

// Get a copy of the widget
Widget widget;
{
    auto guard = std::lock_guard(m_mutex);
    widget = m_widget;
}
⟦ use the variable "widget" ⟧

This does suffer from the problem of running the Widget constructor for an object that we’re going to overwrite anyway. The compiler will also have to deal with the possibility that the lock_guard constructor throws an exception, forcing the destruction of a freshly-constructed Widget.