C++ Day 2025

By Marco Arena | Sep 10, 2025 12:44 AM | Tags: community

A full day of C++ in Pavia (Italy) on October 25:

C++ Day 2025

An event organized by the Italian C++ Community and SEA Vision.

Sponsors: SEA Vision, ELT, Sigeo (and others in the pipeline).

 

All talks will be in English.

 

In a nutshell

Launched in 2016, C++ Day is a community-driven event format by the Italian C++ Community, co-organized with external partners like companies and universities.

The C++ Day 2025 will be held in person on October 25 in Pavia, a joint effort between the Italian C++ Community and SEA Vision, who is also generously hosting the event at their venue.

The event is free to attend, runs for an entire day, and includes coffee breaks and lunch.

 

Who should attend the C++ Day 2025?

This event is made by passionate C++ professionals for C++ professionals, companies, students and enthusiasts.

 

What can I find at the C++ Day 2025?

• 6 tech talks
• 2+ hours of networking
• Some Sponsors on site
• 2 coffee breaks and lunch included
• Cozy atmosphere, games and gadgets

You can refer to the detailed program for more information.

 

When does the C++ Day 2025 take place?

The event will be held on October 25, 2025 at SEA Vision headquarters, in Pavia.

Open doors at 8.30 AM. The event starts at 9.15 AM and will last for a full day.

 

Who supports this event?

Sponsors: SEA Vision, ELT, Sigeo (and others in the pipeline).

 

Do I need to register?

The C++ Day 2025 is free, but you must register to facilitate the organization of the event. You can register here.

CppCon 2025 Clean code! Horrible performance? -- Sandor Dargo

By Blog Staff | Sep 9, 2025 01:35 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

Clean code! Horrible performance?

Friday, September 18 14:45 - 15:45 MDT

by Sandor Dargo

Summary of the talk:

Clean code promises readability, maintainability, and clarity. But is it possible that the pursuit of clean code comes at a catastrophic cost to performance? Some sceptics argue that adhering to clean code practices means sacrificing years - if not decades - of hardware advancements. Is clean code really that expensive? Let’s explore the complex relationship between clean code and software performance. In this talk, we’ll delve into what makes software performant. We’ll demystify the effects of clean code on performance and discover what real bottlenecks are that you’ll encounter while working on enterprise software.

But what is performance, really? While many immediately think of raw runtime speed, the landscape is far more intricate. We’ll explore different facets of performance, including compile-time efficiency, memory usage, and the performance of developers themselves. However, our primary focus will be on runtime performance.

The pivotal question we aim to answer is whether sheer runtime performance always reigns supreme. Can you truly achieve a 10x scale-up by eliminating dynamic polymorphism and virtual function calls? The very idea might seem absurd, but, believe it or not, in some specialized niches, that’s part of the solution. Still, the vast majority of us don’t work in those niches. We face different challenges.

We’ll navigate through real-life examples where awful algorithms hardly mattered, where prudent database and network management became the true path to scalability. I don’t claim that writing code that’s easy to understand and modify always yields optimal performance. Yet, more often than not, performance bottlenecks and the road to performant software lie elsewhere.

Sandor is a passionate software developer focusing on reducing the maintenance costs by developing, applying and enforcing clean code standards. His other core activity is knowledge sharing both oral and written, within and outside of his employer. When not reading or writing, he spends most of his free time with his two children and his wife baking at home or travelling to new places.

CppCon 2025 Graphics Programming with SDL 3 -- Mike Shah

By Blog Staff | Sep 8, 2025 01:33 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

Graphics Programming with SDL 3

Friday, September 19 13:30 - 14:30 MDT

by Mike Shah

Summary of the talk:

The C++ programming language does not have a standard graphics library, However, there exists many popular graphics frameworks for cross-platform graphics. In this talk, I will provide an introduction to the Simple Directmedia Layer (SDL) library, which has at the start of 2025 released version 3. This library for several decades has been a standard in the games and graphics industry. Throughout this talk, I will show how to get started with the library, some more advanced examples (including compiling graphics applications to web), and then talk about what a standard graphics library could look like in C++, or if it is even necessary. I will also talk about the 3D GPU library in SDL3. Attendees will leave this talk ready to build multimedia / game applications and with an understanding on if SDL3 is the right tool for them.

Mike Shah is currently a teaching faculty with primary teaching interests  in computer systems, computer graphics, and game engines. Mike's research interests are related to performance engineering (dynamic analysis), software visualization, and computer graphics. Along with teaching and research work, Mike juggles occasional consulting work as a 3D Senior Graphics Engineer in C++ and producing programming content at his YouTube channel https://www.youtube.com/@MikeShah

Planning a 5th track for Meeting C++ 2025

By Meeting C++ | Sep 8, 2025 11:51 AM | Tags: meetingcpp conference community

Meeting C++ is putting together a 5th track, which will feature onsite in Berlin

Planning a 5th track for Meeting C++ 2025

by Jens Weller

From the article:

I'm working on adding a 5th Track to Meeting C++ 2025 for onsite.

Already last year I've been thinking about this, but in the end its been to expensive to do, and hence only feasible with a large increase in onsite attendees. This year I'm able to go a different route through sponsorship, and thus for onsite the cost is covered by sponsors. Which in turn then also contribute talks. I hope that most talks will be in the schedule by October, and I plan to release the first talks in September for the new track. Right now the track is not visible in the schedule, as I don't want to add an empty track. We may also stream the online track into the conference in a room.

 

CppCon 2025 The Pattern Matching We Already Have -- Braden Ganetsky

By Blog Staff | Sep 7, 2025 01:32 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

The Pattern Matching We Already Have

Friday, September 19 09:00 - 10:00 MDT

by Braden Ganetsky

Summary of the talk:

All the way since C++98, we have already had pattern matching in C++! It's limited to specific places, but it's there. Template argument deduction, function overload resolution, and class template specializations are all instances of pattern matching in the C++ language, dating all the way back to the original standard.

The C++11 additions to the language also require library constructs to help deal with type deduction in forwarding references, namely std::forward, among others. Even experienced C++ developers may run into unexpected situations using it, especially in newer scenarios like concepts from C++20. This talk will lay clear the rules of forwarding and std::forward, and how you can forward your arguments properly every time.

This interactive talk is a deep dive into template argument deduction, helping you to understand it at deeper level across all of C++'s lifespan. Almost all that applies in C++98 still applies today, so a foundational understanding is important. Additionally, newer language standards have introduced further wrinkles, like C++11's move semantics and variadic template parameters, as well as C++17's class template argument deduction. By the end of this talk, you will have a solid understanding of how C++ deduces the types used in your code.

Braden Ganetsky graduated from the University of Manitoba with a degree in mechanical engineering, fueled by his passion for mechanical puzzles. During his final year of school, when all classes and activities were remote, he discovered C++ and has been hooked ever since. He interned as a C++ developer, which turned into a full time job, completing a successful pivot of his career. Now he spend his nights working on fun projects like parser combinators, and getting involved in the C++ community. Since 2023, Braden sits on the ISO C++ Committee as a representative of Canada.

CppCon 2025 Using Distributed Trace for End-to-End Latency Metrics -- Kusha Maharshi

By Blog Staff | Sep 5, 2025 01:27 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

Using Distributed Trace for End-to-End Latency Metrics

Thursday, September 18 15:15 - 16:15 MDT

by Kusha Maharshi

Summary of the talk:

In this talk, we'll delve into how we utilized distributed trace to address a prevalent need at a large technology company that serves the finance industry: timing requests from point A to point Z in a complex system, where a whole alphabet's worth of steps occur in between. We'll show how tracing, an open source telemetry standard, helped us generate insights from tracking requests in a complicated, microservices-driven architecture. We'll discuss the challenges faced and lessons learned while building a C++ solution that turns trace data into end-to-end latency metrics. We hope to inspire attendees to apply these lessons to telemetry solutions tailored to their own firms' needs.

Distributed tracing was introduced within our company before it was a stable, open standard. We saw its potential and invested in solutions that utilized its rich, cross-service information. However, existing open source or commercial products didn't fit the complexity and scale of our trace data. Our engineers, incident responders, and managers wanted end-to-end latency metrics to observe complex workflows, so we built our own solution! The resulting metrics now drive service level objectives (SLOs) that set measurable targets that define a system's quality and reliability. When these targets are not met, teams are alerted, thus driving quick remediation. Furthermore, the traces corresponding to any degradation in system health can be used to pinpoint faulty components, as well as aid in the development and testing phases when building new solutions.

From a technical point of view, trace data is represented as directed acyclic graphs (DAGs), and our challenge was processing more than 50 billion daily nodes, with deep fan-outs and fan-ins. These graphical structures mirror real-world scenarios like queuing systems for high-volume messaging, order processing or batched email notifications, and present concurrency choke points at scale. In this talk, we'll break down the design of the C++ microservices we built to process large-scale streaming graphs into metrics, while also addressing scalability bottlenecks. We'll also highlight why we chose C++ and its libraries, powerful profiling tools, and efficient data structures. If you're into building low-latency, high-throughput distributed systems, want to build telemetry solutions that best suit your needs, or just enjoy geeking over graphs, this talk is for you!

Kusha Maharshi is a Senior Software Engineer at Bloomberg, where she passionately works on distributed tracing and observability infrastructure. An avid public speaker, she loves breaking down complex technical challenges with clarity – and a dose of humor. Kusha holds a degree in Computer Science from Carnegie Mellon University, where she specialized in computer systems. Her favorite programming language? Assembly.

A Library Approach to Constant Template Parameters -- Barry Revzin

By Blog Staff | Sep 4, 2025 02:55 PM | Tags: None

C++26 has brought big advances, especially with reflection making its way into the working draft, but one long-standing challenge remains: supporting richer class types as constant template parameters. Although the language solution isn’t here yet, we can get surprisingly far with a library approach that uses reflection and static objects to extend what’s possible today.

A Library Approach to Constant Template Parameters

by Barry Revzin

From the article:

This library achieves two things.

First, it is just, in general, very useful. I’m hoping to make it more of a Real Library™️ once Reflection gets implemented in more than just the Bloomberg fork of Clang that Dan Katz implemented.

Second, I think it demonstrates the power of Reflection. There are so many problems that were not possible in C++23 that become solvable in C++26. We’re going to spend the next several years discovering more of those, and that makes it a pretty exciting time for C++.

CppCon 2025 C++ Parallel Programming Models -- Eran Gilad

By Blog Staff | Sep 3, 2025 01:24 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

C++ Parallel Programming Models

Thursday, September 18 14:00 - 15:00 MDT

by Eran Gilad

Summary of the talk:

Modern C++ offers a wealth of parallel programming features. Those features belong to four different programming models: low-level, a-sync, cooperative multitasking, and data parallel. The low-level model (or rather, non-model) contains the basic building blocks – threads, atomics, mutex etc. The a-sync model contains async, future and related classes. The cooperative multitasking model relies on coroutines. Lastly, the data parallel model contains the parallel algorithms. The four models aren’t just different abstraction levels – each is appropriate for a different program structure. This talk will review the four models, describe the central features used by each model, and discuss the expected use case for each one. Since many of the parallelism features are not new to the language at this point, the talk will not focus on the details of the features themselves. Instead, the talk will put them in the context of a programming model and make the choice of parallel programming features easier for C++ developers.

Eran Gilad is a software engineer at Regatta Data, where he works on one of the most fascinating areas of software development: database internals. Before diving deep into database engineering, Eran was a principal research engineer at Yahoo Research and a member of a systems research group. He holds a PhD in Computer Science from the Technion, where his work centered on various aspects of parallel programming and execution. Beyond his professional work, Eran is passionate about developer communities. He co-organizes the Core C++ conference, the Haifa::C++ meetup group, and the Medabrim C++ WhatsApp group. His involvement in these communities stems from his first job experience, where he was the sole C++ developer at his company for several years.

C++26: std::format improvements (Part 2) -- Sandor Dargo

By Blog Staff | Sep 2, 2025 02:54 PM | Tags: None

In Part 1, we explored the improvements C++26 brings to std::format — from better to_string behavior to compile-time safety checks. In this part, we look at runtime formatting, defect fixes, and support for new types like std::filesystem::path.

C++26: std::format improvements (Part 2)

by Sandor Dargo 

From the article:

Runtime format strings

P2216R3 brought quite some improvements to std::format, including compile-time checking for format strings. Sadly, in use cases where format strings were only available at runtime, users had to go with the type-erased formatting version, std::vformat:

std::vformat(str, std::make_format_args(42));

Using two different APIs is not a great user experience, moreover, std::vformat was designed to be used by formatting function writers and not by end users. In addition, you might run into undefined behaviour, detailed in the next section.

To overcome this situation, P2918R2 adds std::runtime_format so you can mark format strings that are only available at run-time. As such you can opt out of compile-time format strings checks. This makes the API cleaner and the user code will read better as it shows better the intentions.

CppCon 2025 Back to Basics: static, inline, const, and constexpr -- Andreas Fertig

By Blog Staff | Sep 1, 2025 12:54 PM | Tags: None

Registration is now open for CppCon 2025! The conference starts on September 13 and will be held in person in Aurora, CO. To whet your appetite for this year’s conference, we’re posting some upcoming talks that you will be able to attend this year. Here’s another CppCon future talk we hope you will enjoy – and register today for CppCon 2025!

Back to Basics: static, inline, const, and constexpr

Thursday, September 18 09:00 - 10:00 MDT

by Andreas Fertig

Summary of the talk:

C++ comes with a whole toolbox of keywords you can apply to types and functions. You think it's straightforward? My experience says otherwise. There are false-friends like static , which I often see misapplied.

In this talk, I will demystify those tricky little keywords. You'll learn what they really mean, how they behave in different contexts, and — most importantly — when to use them (and when not to). Think const, constexpr, consteval, constinit: yes, C++ has more flavors of constness than your local ice cream shop. We'll explore them all.

We'll go beyond syntax and dive into what's actually happening in the language.

While the talk includes some features from C++23, most of what we cover is rooted in C++11 or even classic C++98. We'll touch on important concepts like the One Definition Rule (ODR) and top-level qualifiers, giving you a deeper understanding of how these keywords shape your code.

After this session, you'll walk away knowing exactly where each keyword belongs. No more guesswork. Just the right keyword in the right place.

Andreas Fertig, CEO of Unique Code GmbH, is an experienced trainer and consultant for C++ for standards 11 to 23. Andreas is involved in the C++ standardization committee, developing the new standards. At international conferences, he presents how code can be written better. He publishes specialist articles, e.g., for iX magazine, and has published several textbooks on C++. With C++ Insights (https://cppinsights.io), Andreas has created an internationally recognized tool that enables users to look behind the scenes of C++ and thus understand constructs even better. Before training and consulting, he worked for Philips Medizin Systeme GmbH for ten years as a C++ software developer and architect focusing on embedded systems. You can find Andreas online at andreasfertig.com.